McIntosh MA5100 Spécifications télécharger pdf (Page 13)

CONNECTING A LOUDSPEAKER:

The MA5100 is designed for stereo operation only. Do not connect the

MA5100 for monophonic operation. Damage to the loudspeaker may

result.

Speakers are connected at the OUTPUT barrier strips on the back

panel of the MA5100.

Connect the leads from the left loudspeaker to the LEFT OUTPUT bar-

rier strip. Connect the leads from the right loudspeaker to the RIGHT

OUTPUT barrier strip. Use lamp cord, bell wire, or wire with similar

type of insulation to connect the speakers to the amplifier. For the

normally short distances of under 50 feet between the amplifier and

speaker, #18 wire or larger can be used. For distances over 50 feet

between the amplifier and speaker use larger wire.

LEFT OUTPUT

RIGTH LOUDSPEAKER

RIGHT OUTPUT

LEFT LOUDSPEAKER

RECORD PLAYER 1

RECORD PLAYER 2

TAPE PLAYER

(NO SELF CONTAINED ELECTRONICS)

Connect the "left" channel to the "upper" PH 1 input jack.

Connect the "right" channel to the "lower" PH 1 input jack.

PHONO 2 position is used if two record players are used in a system.

Connect the "left" channel to the "upper" PH 2 input jack. Connect

the "right" channel to the "lower" PH 2 input jack.

CONNECTING A STEREO TUNER

Plug the cable from the "left" channel tuner output into the upper

TUNER jack on the MA5100.

Plug the cable from the "right" channel tuner output into the lower

TUNER jack on the MA5100.

CONNECTING A TAPE RECORDER FOR PLAYBACK:

Plug the cable from the "left" channel recorder output into the "upper"

TAPE input jack on the MA5100.

Plug the cable from the "right" channel recorder output into the "lower"

TAPE input jack on the MA5100.

CONNECTING A RECORD PLAYER TO PHONO 1:

Connect the MA5100 TAPE output jacks to the high level inputs on

the tape recorder.

CONNECTING A TAPE RECORDER TO RECORD:

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 19 20

Pas de commentaire

McIntosh MA5100 Spécifications Page 13