McIntosh MC275 Manuel du propriétaire télécharger pdf (Page 15)

Packing Instructions

In the event it is necessary to repack the equipment for

shipment, the equipment must be packed exactly as de-

scribed and shown below.

The MC275 Vacuum Tubes must be removed from the

Amplifier Tube Sockets and placed into the openings of the

four layer foam packing material. The foam with the tubes

located inside are placed into the Amplifier Tube Cover

and secured to the Chassis. Failure to do this will result in

damage to the Vacuum Tubes and possibly the MC275.

It is very important that the four plastic feet are at-

tached to the bottom of the equipment. This will ensure the

proper equipment location on the bottom pad. Failure to do

this will result in shipping damage.

Use the original shipping carton and interior parts only

if they are all in good serviceable condition. If a shipping

carton or any of the interior part(s) are needed, please call

or write Customer Service Department of McIntosh Labo-

ratory. Please see the Part List for the correct part numbers.

Quantity Part Number Description

1 034005 Shipping carton outside

2 033718 Foam Pad (side)

2 034266 Foam pack tube (ends)

2 034265 Foam pack tube (inside

with tube cutouts)

1 034006 Shipping carton inside

1 033707 Top pad

1 033712 Foam pad (tube cover)

1 033704 Bottom pad

1 033705 Front pad

1 033706 Rear pad

1 033711 Side pads

4 017862 Plastic foot

1 2 ... 10 11 12 13 14 15 16

Pas de commentaire

McIntosh MC275 Manuel du propriétaire Page 15