McIntosh MC601 Manuel du propriétaire télécharger pdf (Page 4)

Cable Information, Introduction and Performance Features

XLR Connectors

Below is the Pin configuration for the XLR Balanced

Input, Input/Output Connectors on the MC601. Refer

to the diagram for connection:

PIN 1: Shield/Ground

PIN 2: + Input/Output

PIN 3: - Input/Output

Power Control Connector

The MC601 Power Control Input receives an On/Off

signal from +5 to +12 volts. The Power Control Output

will in turn provide a +12 volt

Output Signal with a total cur-

rent up to 50mA. An additional

connection is for controlling

the illumination of the MC601

Power Output Meters. The 1/8

inch stereo mini phone plug connects to a McIntosh

Preamplifier or A/V Control Center Power Control

Output.

Note: The Power Control Connecting Cable is available

from the McIntosh Parts Department:

Data and Power Control Cable Part No. 170-202

Six foot, shielded 2 conductor, with 1/8 inch stereo

mini phone plugs on each end.

Connector and Cable Information

PIN 2 PIN 1

PIN 3

PIN 1

PIN 2

PIN 3

Introduction

Now you can take advantage of traditional McIntosh

standards of excellence in the MC601 Quad Balanced

Power Amplifier. The 600 watts high current output

will drive any high quality Loudspeaker. The MC601

reproduction is sonically transparent and absolutely

accurate. The McIntosh Sound is “The Sound of the

Music Itself.”

Performance Features

OUT

• Power Output

The MC601 is a Power Amplifier with a capability of

600 watts into 2, 4 or 8 ohm speakers with less than

0.005% distortion. The Power Amplifier Circuitry

uses Thermal Trak

Output Transistors for lower dis-

tortion and cool operation.

• Quad Balanced Circuitry

The MC601 is fully balanced from input to output. It

consists of two matched power amplifiers operating

in push-pull with their outputs combined in a McIn-

tosh Autoformer. The Quad Balanced configuration

cancels virtually all distortion.

• Patented Autoformer

McIntosh designed and manufactured Output Auto-

formers provide an ideal match between the amplifier

output stages and speaker loads of 2, 4 and 8 ohms.

The Autoformers also provide perfect DC protection

for your valuable loudspeakers.

• Balanced and Unbalanced Inputs

Balanced connections guard against induced noise and

allow long cable runs without compromising sound

quality.

• Power Guard

The patented McIntosh Power Guard circuit prevents

the amplifier from being over driven into clipping,

with its harsh distorted sound that can also damage

your valuable loudspeaker.

• Sentry Monitor and Thermal Protection

McIntosh Sentry Monitor power output stage protec-

tion circuits ensure the MC601 will have a long and

trouble free operating life. Built-in Thermal Protection

Circuits guard against overheating.

• Special Power Supply

A very large Power Transformer and Large Capaci-

tors ensure stable noise free operation even though the

power line varies.

• Illuminated Power Meter

The Illuminated Power Output Watt Meter on the

MC601 is peak responding, and indicates the true

power output of the amplifier. The Peak Watt Hold

Mode allows the meter to temporarily stay at the high-

est power output and then slowly decay. The Front

Panel Meter Illumination may be switched Off at any

time.

• McIntosh Custom Binding Posts

McIntosh patent pending gold plated output terminals

deliver high current output. They accept large diam-

eter wire and spade lugs. Banana plugs may also be

used only in the United States and Canada.

• Fiber Optic Solid State Front Panel Illumination

The even Illumination of the Front Panel is accom-

plished by the combination of custom designed Fiber

Optic Light Diffusers and extra long life Light Emit-

ting Diodes (LEDs).

• Glass Front Panel and Super Mirror Chassis

Finish

The famous McIntosh Illuminated Glass Front Panel

and the Stainless Steel Chassis with Super Mirror Fin-

ish ensures the pristine beauty of the MC601 will be

retained for many years.

Trigger

Control

Ground

Meter

Illumination

Control

ThermalTrak™ and ON Semiconductor are trademarks of Semi-

conductor Components Industries, LLC

1 2 3 4 5 6 7 8 9 ... 19 20

Commentaires sur ces manuels

Pas de commentaire

McIntosh MC601 Manuel du propriétaire Page 4

Commentaires sur ces manuels

Produits connexes et manuels pour Amplificateurs audio McIntosh MC601