Mcintosh MA6600 Manuel d'utilisateur télécharger pdf (Page 23)

Packing Instructions

In the event it is necessary to repack the equipment for

shipment, the equipment must be packed exactly as shown

below. It is very important that the four plastic feet are

attached to the bottom of the equipment. Two #10 x 2-1/2

inch screws and washers must be used to fasten the unit

securely to the bottom pad and wood skid. This will ensure

the proper equipment location on the bottom pad. Failure

to do this will result in shipping damage.

Use the original shipping carton and interior parts only

if they are all in good serviceable condition. If a shipping

carton or any of the interior part(s) are needed, please

call or write Customer Service Department of McIntosh

Laboratory. Refer to page 3. Please see the Part List for the

correct part numbers.

Packing Instructions

Quantity Part Number Description

1 033888 Shipping carton

4 033887 End Cap

1 033697 Inner carton

1 033725 Top pad

1 034301 Bottom pad

1 033699 Wood skid

2 017218 Plastic foot (spacer)

2 401204 #10 x 2-1/2 inch wood screw

2 404033 #10 flat washer 1-3/4 inch

4 017937 Plastic foot

4 400159 #10-32 x 3/4 machine screw

4 404080 #10 flat washer

1 2 ... 18 19 20 21 22 23 24

Pas de commentaire

Mcintosh MA6600 Manuel d'utilisateur Page 23