McIntosh MC152 Manuel du propriétaire télécharger pdf (Page 11)

How to Connect for Bi-Amp

terminal cap until the cable is firmly clamped into

the terminals so the lugs or wire cannot slip out.

Refer to figures 7 and 8.

Note: The illustration on separate sheet “Mc1B” is

connections for 8Ω (ohms) Loudspeakers.

If the Loudspeaker’s impedance is in-between the

available connections, use the nearest lower imped-

ance connection. Refer to “General Information” Note

3 on page 3 for additional information.

WARNING: Loudspeaker terminals are hazard-

ous live and present a risk of electric

shock. For additional instruction on

making Loudspeaker Connections con-

tact your McIntosh Dealer or McIn-

tosh Technical Support.

11. Connect the MC152 power cord to an active AC

outlet.

8. Referring to figure H, connect the

Loudspeaker hookup cables with

banana plugs into the hole at the top

of the MC152 Negative and Positive

Output Terminals. The terminals are

indentified as 2Ω (ohms),

4Ω (ohms) or 8Ω (ohms)

connection to match the

impedance of the Loud-

speaker, being careful

to observe the correct

polarities.

Note: The illustration on separate sheet “Mc1B” is

connections for 8Ω (ohms) Loudspeakers.

If the Loudspeaker’s impedance is in-between the

available connections, use the nearest lower imped-

ance connection. Refer to “General Information” Note

3 on page 3 for additional information.

WARNING: Loudspeaker terminals are hazardous

live and present a risk of electric shock.

For additional instruction on making

Loudspeaker Connections contact your

McIntosh Dealer or McIntosh Techni-

cal Support.

9. Connect the MC152 power cord to an active AC

outlet.

Spade Lug or Wire Connections:

10. Connect the Loudspeaker hookup cables to the

MC152 Negative Output Terminal and Positive

Output Terminal indentified as 2Ω (ohms), 4Ω

(ohms) or 8Ω (ohms) connection to match the

impedance of the Loudspeaker, being careful to

observe the correct polarities. Insert the spade

lug connector or prepared section of the cable end

into the terminal side access hole, and tighten the

Figure 7

Figure 8

Figure H

Figure G

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 19 20

Commentaires sur ces manuels

Pas de commentaire

McIntosh MC152 Manuel du propriétaire Page 11

Commentaires sur ces manuels

Produits connexes et manuels pour Équipement musical supplémentaire McIntosh MC152