McIntosh MPC1500 Manuel du propriétaire télécharger pdf (Page 10)

How to Connect in a Multi Channel System

In the following example two of the four SWITCHED

AC OUTLETS on the MPC1500 will operate differ-

ently from the default settings. Outlet number 4 will

be used for the Zone B Power Amplifier. Outlets 3 and

5 for source components to power up for Zone A and/

or Zone B. For additional information refer to “How to

Operate” on page 12.

1. Connect a Control Cable from the MPC1500 LO-

CAL POWER CONTROL IN Jack number 4 to the

Power Control Zone B Out Jack on the A/V Control

Center. Place the number 4 switch in the LCL posi-

tion.

2. Connect the AC Power Cord from the Power Am-

plifier to MPC1500 SWITCHED AC OUTLET 4.

3. Connect a Control Cable from the MPC1500

GLOBAL POWER CONTROL IN Jack to A/V

Control Center ACC Power Control Out Jack.

4. Connect a Control Cable from the MPC1500

GLOBAL POWER CONTROL OUT Jack to the

Power Control In jack on the Disc Player.

5. Connect the AC Power Cords from the Disc Player

to the SWITCHED AC OUTLET 5. Place the num-

ber 6 switch in the ON position.

6. Connect any remaining Components in a similar

manner.

7. Using the supplied AC Cord, connect the MPC1500

directly to an AC Wall Outlet.

Zone B Power Amplifier

To AC Outlet

A/V Control Center

Disc Player

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 31 32

Pas de commentaire

McIntosh MPC1500 Manuel du propriétaire Page 10