McIntosh MPC1500 Manuel du propriétaire télécharger pdf (Page 31)

Packing Instructions

In the event it is necessary to repack the equipment for

shipment, the equipment must be packed exactly as

shown below. It is very important that the four plastic

feet are attached to the bottom of the equipment. Two

#10 x 2-1/2 inch screws and washers must be used to

fasten the unit securely to the bottom pad and wood

skid. This will ensure the proper equipment location

on the bottom pad. Failure to do this will result in

shipping damage.

Use the original shipping carton and interior parts

only if they are all in good serviceable condition. If

a shipping carton or any of the interior part(s) are

needed, please call or write Customer Service Depart-

ment of McIntosh Laboratory. Refer to page 4. Please

see the Part List for the correct part numbers.

Packing Instructions

Quantity Part Number Description

1 033888 Shipping carton

4 033887 End Cap

1 033697 Inner carton

1 033725 Top pad

1 034301 Bottom pad

1 033699 Wood skid

2 017218 Plastic foot (spacer)

2 401204 #10 x 2-1/2 inch wood screw

2 404033 #10 flat washer 1-3/4 inch

4 017937 Plastic foot

4 400159 #10-32 x 3/4 machine screw

4 404080 #10 flat washer

1 2 ... 26 27 28 29 30 31 32

Pas de commentaire

McIntosh MPC1500 Manuel du propriétaire Page 31