McIntosh MA8000 Manuel du propriétaire télécharger pdf (Page 21)

The MA8000 may be remotely controlled from other

equipment connected to the Rear Panel RS232C Jack.

The speed at which the MA8000 communicates (8 bit,

no parity and 1 stop bit) with other equipment is ad-

justable from 9,600 bits per second to 115,200 bits per

second. To change from the default speed of 115,200

bits per second, perform the following steps:

1. Press and hold the INPUT CONTROL until the

Front Panel Display indicates the Setup Mode is

active. Then rotate the INPUT CONTROL until

the Setup Menu item “SETUP: COMM PORT,

BAUD RATE: 115200” appears on the Front

Panel Display. Refer to figure 27.

2. Rotate the VOLUME Control to select the desired

speed.

3. To exit from the Setup Mode, press the INPUT

CONTROL and the Front Panel Display will

revert back to its normal display.

7. Press the VOLUME Control repeatedly until the

Source Input Menu item “SETUP: TRIG1 OUT-

PUT, Source: TUNER OFF” appears on the

Front Panel Display. Refer to figure 22.

8. Rotate the VOLUME Control until “SETUP:

TRIG1 OUTPUT, Source: TUNER ON” appears.

Refer to figure 23.

9. To exit from the Setup Mode, press the INPUT

CONTROL and the Front Panel Display will revert

back to its normal display.

EXAMPLE THREE:

The Trigger 1 and Trigger 2 Outputs will be assigned

to the OUTPUT 1 or OUTPUT 2 Push-buttons.

10. Press and hold the INPUT CONTROL until the

Front Panel Display indicates the Setup Mode is

active. Then rotate the INPUT CONTROL until

the Setup Menu item “SETUP: TRIG1 OUTPUT,

Action: MAIN” appears on the Front Panel Dis-

play. Refer to figure 17.

11. Rotate the VOLUME Control until “SETUP:

TRIG1 OUTPUT, Action: OUT 1” appears. Refer

to figure 24.

12. Rotate the INPUT CONTROL until the Setup

Menu item “SETUP: TRIG2 OUTPUT, Action:

MAIN” appears on the Front Panel Display. Refer

to figure 25.

13. Rotate the VOLUME Control until “SETUP:

TRIG2 OUTPUT, Action: OUT 2 ” appears.

Refer to figure 26.

Record any changes made to the various inputs from

the default settings in the “Input and Power Control

Settings” chart on page 19 for future reference.

14. To exit from the Setup Mode, press the INPUT

CONTROL and the Front Panel Display will

revert back to its normal display.

Setup, con’t

Figure 22

SETUP: TRIG1 OUTPUT

Source: Tuner OFF

Figure 23

SETUP: TRIG1 OUTPUT

Source: Tuner ON

Figure 24

SETUP: TRIG1 OUTPUT

Action: OUT 1

Figure 25

SETUP: TRIG2 OUTPUT

Action: MAIN

Figure 26

SETUP: TRIG2 OUTPUT

Action: OUT 2

Comm Port Baud Rate

Figure 27

SETUP: COMM PORT

BAUD RATE: 115200

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 43 44

Commentaires sur ces manuels

Pas de commentaire

McIntosh MA8000 Manuel du propriétaire Page 21

Commentaires sur ces manuels

Produits connexes et manuels pour Équipement musical supplémentaire McIntosh MA8000