McIntosh MA8000 Manuel du propriétaire télécharger pdf (Page 43)

In the event it is necessary to repack the equipment for

shipment, the equipment must be packed exactly as

shown below. It is very important that the four plastic

feet are attached to the bottom of the equipment. Two

#10 x 2-1/2 inch screws and washers must be used to

fasten the unit securely to the bottom pad and wood

skid. This will ensure the proper equipment location

on the bottom pad. Failure to do this will result in

shipping damage.

Use the original shipping carton and interior parts

only if they are all in good serviceable condition. If

a shipping carton or any of the interior part(s) are

needed, please call or write Customer Service Depart-

ment of McIntosh Laboratory. Refer to page 3. Please

see the Part List for the correct part numbers.

Packing Instructions

Quantity Part Number Description

1 034052 Shipping carton top

1 034051 Shipping carton bottom

2 034186 Front and rear foam pad

2 034187 Side foam pad

2 034054 Top and bottom foam pad

1 034136 Inner carton top

1 034137 Inner carton bottom

1 034188 Inner foam pad

1 034479 Shipping skid

4 401212 1/4-20 hex cap x 2-1/4 inch

screw

2 404033 1/4 inch flat washer 1-1/2

inch

4 017937 Plastic foot

4 404080 #10 flat washer

Packing Instructions

MA8000 Packing Material List

1 2 ... 38 39 40 41 42 43 44

Pas de commentaire

McIntosh MA8000 Manuel du propriétaire Page 43