McIntosh MA6600 Manuel du propriétaire Page 18

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 28
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 17
18
Front Panel or Remote Control. Refer to figures 15, 16
and 17.
Volume Control
Rotate the Front Panel VOLUME Control or use the
VOLUME Upp or Downq Push-buttons on the Re-
mote Control for the desired listening level. Refer to
figures 15, 16 and 17.
Trim Functions
The MA6600 has six different Trim Selections with
Adjustments. The Trim Selections include Balance,
Bass, Treble, Tone Bypass, Input Level Matching and
Power On
The Red LED above the STANDBY/ON Push-button
lights to indicate the MA6600 is in Standby mode. To
Switch ON the MA6600, press the STANDBY/ON
Push-button on the Front Panel or the (Power On)
Push-button on the Remote Control. The MA6600
will go through a brief startup initialization with the
Front Panel Information Display indicating the last
used source and volume setting, this is followed by
the volume setting indication starting at zero and then
increasing to the last used volume setting. Refer to
figures 15, 17 and 18.
Note: Wait at least five seconds after making any
operational changes to the MA6600 before
switching Power Off in order to retain the
changes in memory.
Source Selection
Rotate the INPUT Control to select the desired source
or press the appropriate push-button switch on the
Meter Illumination. The Trim
Settings are stored in memory
independently for each Input
Source Selected, the only ex-
ception being Meter Illumina-
tion setting of On or Off, which
is the same for all inputs.
BALANCE
Listening balance varies with
different program sources,
room acoustics and listening
positions relative to the Loud-
speakers. Use the Balance
(Trim Function) as needed to
achieve approximately equal
listening volume levels in each
Loudspeaker. To adjust the Bal-
ance perform the following:
1. Rotate the Front Panel
TRIM SELECT Control or
press the TRIM Push-button
on the Remote Control until
“BALANCE 0 dB” appears
on the Front Panel Informa-
tion Display. Figure 19.
2. Rotate the TRIM ADJUST
Control or press the LEVEL
+ / - Push-buttons to em-
phasize the Right Channel
(refer to figure 20) or the
Left Channel (refer to figure
21).
How to Operate the MA6600
SOURCE: CD1
15%
Figure 17
Figure 15
SOURCE: CD1
15%
Figure 16
SOURCE: SERVER
30%
Figure 18
Figure 19
BALANCE 0 dB
||
Vue de la page 17
1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 27 28

Commentaires sur ces manuels

Pas de commentaire