McIntosh MA6600 Manuel du propriétaire télécharger pdf (Page 22)

How to Operate the MA6600, con’t

Figure 42

MASTER RESET

-CLEARED-

Using Output 2

The MA6600 has provisions for connecting an exter-

nal Power Amplifier (to drive Loudspeakers in another

room) and an external sensor for remote operation of

the MA6600 from that room. With an external Power

Amplifier connected (as illustrated on the McIntosh

Connection Diagram separate sheet “Mc1B”), press

the Front Panel OUTPUT 2 Push-button or press on

the Remote Control the 2nd Push-button followed by

pressing the OUTPUT 2 Push-button to switch On or

Off the external Power Amplifier.

Reset of Microprocessors

In the unlikely event the controls of the MA6600 stop

functioning, the microprocessors can be reset by per-

forming the following:

1. Press the STANDBY/ON Push-button for approxi-

mately five seconds.

2. When the MA6600 cycles On then Off, release the

STANDBY/ON Push-button.

3. When the STANDBY/ON LED is illuminated

press the STANDBY/ON Push-button, the

MA6600 will resume normal operation.

Note: This can be performed with the MA6600 On or

in the Standby Mode.

Resetting the MA6600 to default settings

If it becomes desirable to reset all the adjustable set-

tings (Setup and Trim Settings) to the factory default

values, perform the following:

1. Press both the STORE/EXIT and OUTPUT 2

Push-buttons until the Front Panel Display indi-

cates “MASTER RESET” (refer to figure 42), then

release

the two

push-

buttons.

2. Press the

STANDBY/ON Push-button and the MA6600 will

resume operation.

SOURCE: CD1

15%

Figure 17

Figure 18

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 28

Commentaires sur ces manuels

Pas de commentaire

McIntosh MA6600 Manuel du propriétaire Page 22

Commentaires sur ces manuels

Produits connexes et manuels pour Amplificateurs audio McIntosh MA6600