McIntosh D100 Manuel du propriétaire télécharger pdf (Page 10)

Connecting to an Analog Preamplifier or A/V Control Center

Connecting to an Analog Preamplifier or

A/V Control Center

The D100 has the ability to automatically switch

Power On/Off with the Analog Preamplifier or A/V

Control Center via the Power Control connection. The

Data Port Connections allow for the remote operation

of basic D100 functions using the Analog Preamplifier

Remote Control.

The connection instructions below, together with

the D100 Connection Diagram located on the separate

folded sheet “Mc1B”, is an example of a typical audio

system. Your system may vary from this, however the

actual components would be connected in a similar

manner. For additional information refer to “Connec-

tor and Cable Information” on page 4.

Note: The Analog Preamplifier or A/V Control Center

Power may be connected to the D100 Balanced

or Unbalanced Outputs.

Power Control Connections:

1. Connect a Control Cable from the Analog Pream-

plifier or A/V Control Center to the D100 POWER

CONTROL IN Jack.

2. Connect a Control Cable from the D100 POWER

CONTROL OUT Jack to the Tuner Power Control

In Jack.

3. Connect a Control Cable from the Tuner Power

Control Out Jack to the SACD/CD Player Power

Control In Jack.

4. Connect any additional Components in a similar

manner, as outlined in steps 2 and 3.

Data Connection:

5. Connect a Control Cable from the D100 DATA IN

Jack to the Analog Preamplifier or A/V Control

Center DVD or VIDEO Data Port Input.

Sensor Connection:

6. Optionally, connect the external Sensor to the Ana-

log Preamplifier or A/V Control Center IR Input

Connector to the external Sensor.

Audio Connections:

7. Connect balanced audio cables from the D100

FIXED AUDIO OUTPUT (R&L) connectors to

the balanced Input connectors on the Analog Pre-

amplifier or A/V Control Center DVD or VIDEO

Input.

Digital Audio Connections:

8. Connect a Digital Coaxial Cable from the D100

DIGITAL AUDIO COAXIAL IN 1 Jack to the

Tuner Digital Coaxial Output Jack.

9. Connect a Digital Optical Cable from the D100

DIGITAL AUDIO OPTICAL IN 1 Jack to the

SACD/CD Player Digital Optical Output Jack.

10. Connect a USB cable with (type A to type B) con-

nectors from the D100 DIGITAL AUDIO INPUT

USB to the Computer USB connector.

AC Power Cords Connections:

11. Connect the D100, Analog Preamplifier or A/V

Control Center and any remaining components’

AC Power Cords to a live AC outlet as illustrated.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 19 20

Commentaires sur ces manuels

Pas de commentaire

McIntosh D100 Manuel du propriétaire Page 10

Commentaires sur ces manuels

Produits connexes et manuels pour Équipement musical McIntosh D100