McIntosh D100 Manuel du propriétaire télécharger pdf (Page 15)

USB Input Operation with a Computer

The D100 USB Input provides the capability to play-

back music from a computer, when the computer is

connected to the rear panel USB connector.

Note: The USB Input is for direct connection to com-

puter only. To playback music from a USB Drive,

connect the USB Drive to another USB Port on

the computer and select the USB Drive with the

Media Playback Program.

The D100 USB Input is compatible with both PC

Computers using Microsoft® Windows® (XP with

Service Pack 3, Vista with Service Pack 1 and Win-

dows 7) and the Apple® Macintosh® Computers

using OS-10.6 with the latest update.

When using a PC Computer with Windows, a spe-

cial McIntosh USB Audio Software Driver needs to be

installed on the PC Computer. The driver needs to be

installed before connecting the D100 USB Input to an

USB Port on the computer.

Note: If an Apple Macintosh computer is used with the

D100, no additional driver is required.

The McIntosh USB Audio Windows Driver and

Installation and Operation Guide are available for

download from the McIntosh Web Site:

http://www.mcintoshlabs.com/us/support/Pages/

Manuals.aspx

Under “Product Catorgory” select Preamplifiers

and under “Model Number”

select D100, then click on

“Select”. When the D100

Information appears, down-

load the “McIntosh Audio

Windows Driver Installa-

tion and Operation Guide”

and “McIntosh USB Audio

Windows Driver V_ . _”.

Follow the instructions in the

How to Operate the D100

McIntosh Laboratory, Inc. 2 Chambers Street Binghamton, New York 13903-2699 Phone: 607-723-3512 www.mcintoshlabs.com

USB Audio Windows Driver

Installation and Operation Guide

Guide and after the USB Driver is installed, connect

the D100 to the PC Computer.

Note: When computer application programs and vari-

ous computer hardware components conform

to the Microsoft

Windows

and Apple

Macin-

tosh

standards they should also work well when

used in conjunction with the D100 USB Input. If

you are experiencing difficulty with a specific

computer hardware component or computer ap-

plication program, contact the manufacturer of

the product.

The D100 Preamplifier Front Panel Information

Display will indicate the Sampling Frequency and

Bit Depth of the incoming digital signal. Refer to

figure 54.

Reset of Microprocessors

In the unlikely event the controls of the D100 stop

functioning while On or the D100 will not switch On,

the microprocessors can be reset by performing the

following:

1. Simultaneously press and hold in the MUTE

and SETUP Push-buttons until the LED indica-

tor above the STANDBY/ON Push-button is

extinguished.

2. To switch the D100 back on, press the On

STANDBY/ON Push-button.

Figure 54

5 USB 192 24

1 2 ... 10 11 12 13 14 15 16 17 18 19 20

Commentaires sur ces manuels

Pas de commentaire

McIntosh D100 Manuel du propriétaire Page 15

Commentaires sur ces manuels

Produits connexes et manuels pour Équipement musical McIntosh D100