McIntosh MCD 7007 Instructions d'exploitation télécharger pdf (Page 7)

Repeat this procedure to attach the mounting strip

to the (eft side of the panel.

6. Attach the PANLOC Brackets

Using two screws of the proper length in the A holes

on each side, attach the PANLOC brackets to the

cabinet panel; the short flange is mounted against

the front (face) of the cabinet panel. The screws pass

through the PANLOC bracket flange, the cabinet

panel, and then through the mounting strips

previously mounted.

7. Install the Instrument

Guide the AC power cord through the panel opening

to the back of the cabinet; then, slide the instrument

into the opening carefully so that the rails on the

bottom of each side of the chassis engage the tracks

on the mounting brackets. Continue to slide the in-

strument into the cabinet until the front panel is

flush with the cabinet panel. Turn the PANLOC but-

tons at the lower left and right corners of the instru-

ment panel clockwise to lock the unit firmly in the

cabinet. Turn the PANLOC buttons counterclockwise

to unlock the instrument. It can then slide outward

to permit the removal of the instrument from the

cabinet.

INSTALLATION 5

1 2 3 4 5 6 7 8 9 10 11 12 ... 19 20

Pas de commentaire

McIntosh MCD 7007 Instructions d'exploitation Page 7