Mcintosh C2300 Manuel d'utilisateur télécharger pdf (Page 12)

2. Press the SETUP Push-button to access the Setup

Mode.

3. Rotate the MENU (INPUT) Control until “TRIM

TUN 0.0” appears on the Front Panel Alphanumeric

Display. Refer to figure 4.

Note: If necessary, rotate the SELECT 1 (TRIM SELECT)

Control for “TUN” and rotate the SELECT 2

(TRIM ADJUST) for ”0.0”.

4. Rotate the SELECT 1 Control or use the Remote Con-

trol ◄INPUT► push-button until the display indi-

cates “TRIM CD 0.0”.

5. Rotate the SELECT 2 Control or use the Remote

Control LEVEL  or  Push-buttons until Listening

Volume Level of the CD Input is the same as the Tuner

Volume Level. The figure 5 illustration indicates a

-2.5dB decrease in the CD Level.

6. Rotate the SELECT 1 Control until the name of the

next Input to be adjusted is displayed.

7. Repeat steps 5 and 6 until all the Inputs with sources

connected to the C2300 have the same relative volume

levels when switching between them. Record any

changes made to the various inputs from the default

settings in the “Input Source Settings” chart below.

8. Press the SETUP Push-button to exit the Setup Mode.

Figure 4

Re-Title Inputs

The C2300 provides the ability to change the default Input

Titles to match the components in your system. In the

following example the CDR Input will be renamed and ap-

pear as AUX on the Front Panel Alphanumeric Display.

Notes: 1. One of the high level Inputs may be renamed to AUX

or swiched Off. If any input is switched Off its name

will no longer appear on the Front Panel Alphanu-

meric Display when using the INPUT Control, nor is

it accessible with the Remote Control.

2. When a high level input is switched Off its name will

become available to the remaining high level inputs.

3. The Phono MC and Phono MM Inputs are designed

for connection of a turntable only and thus the title

is not changeable. However, the Phono Input may be

switched Off.

1. Press the SETUP Push-button to access the Setup

Mode.

2. Rotate the MENU Control until “INPUT 3 TUN”

appears on the Front Panel Alphanumeric Display.

3. Rotate the SELECT 1 Control until “INPUT 7

CDR” appears on the Front Panel Alphanumeric Dis-

play. Refer to figure 6.

3. Rotate the SELECT 2 Control until the Front Panel

Alphanumeric Display indicates “INPUT 7 AUX”.

Refer to figure 7.

4. Press the SETUP Push-button to exit the Setup Mode.

Meter Illumination On/Off

The Front Panel Meter Illumination may be switched On or

Off. Follow the steps below to switch the Meter Illumina-

tion Off.

1. Press the SETUP Push-button to access the Setup

Mode.

2. Rotate the MENU Control until the words METER

ON appears.

3. Rotate the SELECT 2 Control until the Front Panel

Alphanumeric Display indicates “METER OFF”.

4. Press the SETUP Push-button to exit the Setup Mode.

Figure 5

Input Source Settings

Default Title New Title Trim Trigger

TUNER

DVD

D/A

CDR

SERVER

MC PHONO

MM PHONO

Figure 6

Figure 7

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 23 24

Commentaires sur ces manuels

Pas de commentaire

Mcintosh C2300 Manuel d'utilisateur Page 12

Commentaires sur ces manuels

Produits connexes et manuels pour Récepteurs et amplificateurs Mcintosh C2300