Mcintosh C2300 Manuel d'utilisateur télécharger pdf (Page 16)

How to Operate the C2300

Power On

The Red LED above the STANDBY/ON Push-button lights

to indicate the C2300 is connected to AC Power. To Switch

ON the C2300, press the STANDBY/ON Push-button on

the Front Panel or the PWR (Power) Push-button on the

Remote Control. The title TUBE WARMUP will appear

on the Front Panel Alphanumeric Display after Turn-On,

with the Audio Outputs muted. Refer to figures 12, 13, 14

and 21.

Source Selection

Select the desired source using the INPUT Control or

Remote Control.

Volume Control

Rotate the Front Panel VOLUME Control or use the

VOLUME + (Up) or - (Down) Push-buttons on the Remote

Control for the desired listening level.

Trim Functions

The C2300 has six different Trim Selections with Adjust

ments. The Trim Selections include Balance, Bass, Treble,

Tone Bypass, Input Level Matching and Meter Illumina-

tion. The Trim Settings are stored in memory independent-

ly for each Input Source Selected, the only exception being

Meter Illumination setting of On or Off which is the same

for all inputs.

BALANCE

Listening balance varies with different program sources,

room acoustics and listening positions relative to the

Loudspeakers. Use the Balance (Trim Function) as needed

to achieve approximately equal listening volume levels in

each Loudspeaker. To adjust the Balance perform the fol

lowing:

1. Rotate the Front Panel TRIM SELECT Control or press

the TRIM Push-button on the Remote Control until

“BALANCE 00” appears on the Front Panel Alphanu-

meric Display.

2. Rotate the TRIM ADJUST Control or press the LEVEL

+ / - Push-buttons to emphasize the Left Channel or the

Right Channel. Refer to figure 15.

The Front Panel Display indicates the Balance changes

in steps from 0 to 107. After approximately 3 seconds the

Alphanumeric Display returns to indicate the Source Se-

lection and Volume Level. When the Balance is set to favor

either left or right channel, the volume number indicated

will have a “< or >” symbol on either side of the number.

Refer to figure 16. To verify the Balance setting without

Figure 14

Figure 13

Figure 12

Figure 15

Figure 16

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 22 23 24

Commentaires sur ces manuels

Pas de commentaire

Mcintosh C2300 Manuel d'utilisateur Page 16

Commentaires sur ces manuels

Produits connexes et manuels pour Récepteurs et amplificateurs Mcintosh C2300