Mcintosh C2300 Manuel d'utilisateur télécharger pdf (Page 15)

How to use the Remote Control

The supplied Remote Control is capable of directly con-

trolling the functions of contemporary McIntosh Source

Components connected to the C2300 Tube Preamplifier.

Input Source Selection

Press the appropriate Source Push-button to select the

desired program source. Sources may also be selected by

pressing the ◄INPUT► push-button.

Mute

Press the MUTE Push-button to mute audio. The Record

Signals present at the SRVR REC OUTPUT Jacks are not

affected by the MUTE function. The C2300 Front Panel

Alphanumeric Display will indicate the word MUTE.

Note: For additional information on the various Mute Modes

refer to page 18.

Mode

Press the MODE Push-button to switch from Stereo to

Mono for Monophonic listening.

Disc, Server and Tape Functions

Use these push-buttons to operate a DVD Player, CD

Player, CD Changer, Music Server or Tape Recorder.

Numbered Push-buttons

Press Push-buttons 0 through 9 to access tuner station pre

sets, tracks on discs or selections on a Music Server.

Disc and Track

Use the DISC and TRACK Push-buttons when a Disc

Player or Music Server is being used.

Tuner Push-buttons

Press the AM or FM Push-button to select the desired

broadcast band. Press and release the CHANnel Up

 or

Down Push-button to move from station to station. Press

and hold a CHANnel Up or Down Push-button to

move continuously from station to station. Press the +10

Push-button to start the automatic brief audition of each of

the presets stored in the tuner memory. Press +10 Push-

button a second time to stop on a station preset.

Volume

Press the Up

 or Down VOLUME Push-button to raise

or lower the listening volume level.

Note: The Record Signals present at SRVR OUTPUTS are not

affected by volume changes.

Pause

Press Pause Pushbutton to perform various functions

on a variety of McIntosh Components. It will also pause

the playing of a disc or tape player. The Pause Push-but-

ton will also allow for quick exiting from the active menu

when in the setup mode. The Pause Push-button is also

used as an Enter Push-button with some McIntosh compo-

nents.

Trim

Press the TRIM Push-button until the word “BALANCE

__” appears on the Alphanumeric display, then press the

LEVEL Up

 Push-button to emphasize the Left Channel

or Down Push-button to emphasize the Right Channel.

Press the TRIM Push-button until the word “TRIM _

_ _ _ _” appears on the Alphanumeric display, then press

the LEVEL Up or Down Push-button to match the

volume level of the previously selected Input.

Note: For additional information on the other Trim Fuctions

refer to pages 16, 17 and 18.

Acc On

Press ACC ON to turn the power ON to a McIntosh Disc

Player.

Acc Off

Press ACC OFF to turn the power OFF to a McIntosh Disc

Player.

Amplifier Selection

Press the 2nd Push-button followed by the OUTPUT 1

or 2 Push-buttons either separately or together, to control

the rear panel OUTPUTS 1, 2 which can feed signals to a

Power Amplifier or other accessory component.

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 23 24

Commentaires sur ces manuels

Pas de commentaire

Mcintosh C2300 Manuel d'utilisateur Page 15

Commentaires sur ces manuels

Produits connexes et manuels pour Récepteurs et amplificateurs Mcintosh C2300