Mcintosh C2300 Manuel d'utilisateur télécharger pdf (Page 7)

Installation

The C2300 can be placed upright on a table or shelf, stand-

ing on its four feet. It also can be custom installed in a

piece of furniture or cabinet of your choice. The four feet

may be removed from the bottom of the C2300 when it is

custom installed as outlined below. The four feet together

with the mounting screws should be retained for possible

future use if the C2300 is removed from the custom instal-

lation and used free standing. The required panel cutout,

ventilation cutout and unit dimensions are shown.

Always provide

adequate ventila-

tion for your C2300.

Cool operation

ensures the longest

possible operating

life for any electron-

ic instrument. Do

not install the C2300

directly above a heat

generating compo-

nent such as a high

powered amplifier.

If all the compo-

nents are installed

in a single cabinet,

a quiet running

ventilation fan can

be a definite asset

in maintaining all

the system compo-

nents at the coolest

possible operating

temperature.

A custom cabinet

installation should

provide the follow-

ing minimum spac-

ing dimensions for

cool operation.

Allow at least 6

inches (15.24cm)

above the top, 2

inches (5.08cm)

below the bottom

and 1 inch (2.54cm)

on each side of the Tube Preamplifier, so that airflow is not

obstructed. Allow 19-1/2 inches (49.53cm) depth behind

the front panel. Allow 1-1/8 inch (2.9cm) in front of the

mounting panel for knob clearance. Be sure to cut out a

ventilation hole in the mounting shelf according to the

dimensions in the drawing.

6-9/16"

16.67cm

17-3/16"

43.66cm

Cutout Opening for Custom Mounting

C2300 Front Panel

Custom Cabinet Cutout

15"

38.1cm

7-1/2"

19.05cm

15"

38.10cm

Cutout

Opening

for

Ventilation

Cutout Opening for Ventilation

Support

Shelf

Chassis

Spacers

C2300 Side View

in Custom Cabinet

C2300 Bottom View

in Custom Cabinet

10.16cm

12-5/16"

31.27cm

Cabinet

Front

Panel

15.24cm

Opening

for Ventilation

Note: Center the cutout Horizontally

on the unit. For purposes of

clarity, the above illustration

is not drawn to scale.

1-1/16"

2.70cm

1 2 3 4 5 6 7 8 9 10 11 12 ... 23 24

Commentaires sur ces manuels

Pas de commentaire

Mcintosh C2300 Manuel d'utilisateur Page 7

Commentaires sur ces manuels

Produits connexes et manuels pour Récepteurs et amplificateurs Mcintosh C2300